Full description
Type: X-am® 2500
- Sensors: Electrochemical to detect CO, H2S, O2, SO2 and NO2 gases
- Batteries: Rechargeable batteries (The charger's material number is 1068742) Operating time: > 12 hours
- Operating time without Ex sensor: typi¬cally > 250 hours.
- Datalogger: Retrievable using an infrared interface > 1000 h with 4 gases at a recording interval of 1 value per minute
- Dimensions: W 48 x H 130 x D 44 mm
- Weight 220 - 250 g
- Operating Temperature: -20 to +50 °C
- Pressure: 700 to 1300 mbar
- Relative humidity: 10 to 95 % r.h.
- Protection class IP 67
- Alarms
- Visual 360 °
- Audible Multi-tone > 90dB at 30cm
- Vibration
- Approvals: ATEX, CSA, IECEx, CE mark and MED
Settings: as standard delivered with the following settings:
- Ex – methan: Measuring range 0-100% LEL. Alarm 1: 20% LEL, Alarm 2: 40 % LEL
- O2: Measuring range 0-25 vol.%. Alarm 1: 19 vol.%, Alarm 2: 23 vol.%
- CO: Measuring range 0-2000 ppm. Alarm 1: 25 ppm, Alarm 2: 50 ppm.
- H2S: Measuring range 0-100 ppm. Alarm 1: 5 ppm, Alarm 2: 10 ppm.
- Calibration interval: 365 days
- Lifesignal: Blink activated (horn deactivated)
- Settings can be changed upon request